The FitSeat can be wiped down with commercially available disinfectants. The wooden parts should not be permanently exposed to moisture.

The saddle height can be changed by opening the quick release on the right side of the flange clamp.

Stelle den Sattel ungefähr auf die Höhe Deine Schrittes ein, wenn Du auf der Bodenplatte des FitSeat stehst. Probier aus, was für Dich angenehm zu fahren ist. Es gibt kein richtig oder falsch. Höre auf Deine Körper. Wenn der Sattel auf der richtigen Höhe ist, schließe den Schnellspanner wieder.

To use the FitSeat, the work surface must be high enough that you can use it whilst standing. The exact height depends on how tall you are.

The FitSeat is mounted on five weight-breaking castors. This ensures that it doesn’t tip over or roll away unintentionally.

The resistance can be continuously adjusted using the lever on the right below the saddle. If you push the lever forwards, there is less resistance, whereas there is more if you push the lever to the back. Try what is most comfortable for you: there is no right or wrong.

FitSeat uses a standard bicycle saddle that you can exchange to suit you. The inclination of the saddle can be individually adjusted.

FitSeat is suitable for everyone between 1.5 and 2 meters (4″11 – 6″6).

The FitSeat’s pelvic support is deliberately slightly set back. This positioning offers two advantages:

1. The upper body’s support muscles are activated, stabilizing the torso.
2. The spine can move freely, mobilizing it.

The pelvic support has two functions:

1. Accident prevention, so that no one ever falls backwards off their FitSeat.
2. Short term back relief, should you wish to lean back.

No, with normal use you won’t break a sweat whilst using your FitSeat. However, you can work up a sweat if you pedal harder. The choice is yours.

The entire FitSeat is “Made in Germany”

Yes, the wood comes from FSC certified forests.

Birch multiplex blocks are used in the construction. 

Each FitSeat is meticulously individually checked.